UPSC Data Processing Assistant Paper On Networking and Data Communications

Data Processing Assistant Model Paper

If You are appearing in UPSC exam for Data Processing Assistant posts in Information Technology Department, Govt. of NcT of Delhi or in National Crime Records Bureau (NCRB), Women Safety, Ministry of Home Affairs which will be conducting on 30th Jan 2022 at various exam centers and searching the Data Processing Assistant Previous year papers. Then you are at right place. Here we are providing the Data Processing Assistant Model paper on Data Communication & Computer Networks

Sr. No Questions with multiple options
1. In byte stuffing process _____ is added if a flag like structure appears in the data.

(a)    Flag

(b)   ESC

(c)    0 bit

(d)   1 bit

2. The ____ address uniquely defines a host on the Internet

(a)    IP

(b)   Port

(c)    Specific

(d)   Physical

3. In IEEE 802.11, a BSS without and AP is called as ____ architecture.

(a)    BSS

(b)   Ad hoc

(c)    ESS

(d)   BSS transition

4. The Address field of a PPP frame is ____ for broadcast address.

(a)    10101010

(b)   11111111

(c)    01010101

(d)   01111110

5. In OS1 model Trailer bit is added at ____ layer.

(a)    Physical

(b)   Network

(c)    Data link

(d)   Application

6. Network Interface Card provides ____ address of the device.

(a)    Logical

(b)   Port

(c)    Specific

(d)   Physical

7. The Circuit switched networks use ____ technique to divide each link into ‘n’ channels.

(a)    FDM

(b)   WDM

(c)    PCM

(d)   DM

8. The B8ZS replaces 8 consecutive zeros with _____

(a)    00V0V00B

(b)   000VB0VB

(c)    B00V0B0V

(d)   000BV0VB

9. A standard Ethernet provides data rate of ____

(a)    1000 Mbps

(b)   100 Mbps

(c)    1000 Kbps

(d)   10 Mbps

10. A ____ layer of TCP/IP is responsible for process to process delivery.

(a)    Network

(b)   Transport

(c)    Application

(d)   Data link

11. The ____ protocol is used to map a logical address to physical address.

(a)    ARP

(b)   RARP

(c)    BOOTP

(d)   DHCP

12. A composite signal is a combination of ____

(a)    Simple sine waves of different phases.

(b)   Simple cosine waves of different amplitudes

(c)    Sine waves of different frequency

(d)   Sine waves of different wavelength

13. Message _____ means the receiver is ensured that the message is coming from the intended sender.

(a)    Confidentiality

(b)   Integrity

(c)    Authentication

(d)   Identification

14. An Add/drop multiplexer of SONET is a ____ layer device.

(a)    Three

(b)   Four

(c)    Two

(d)   Five

Data Collected By – K. Jeyanthi
Published on – 19th Nov 2021

 


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *