OSSC Junior Engineer Civil Syllabus

OSSC JE (Civil) 2020 Syllabus – Odisha Staff Selection Commission released the notification for the Post of Junior Engineer (Civil) in the month of August 2020. OSSC invites applications from the eligible candidates through online mode. OSSC Civil Junior Engineer Syllabus 2020 is essential for the candidates to prepare themselves for the Exam. The Board of OSSC provides Syllabus of JE Civil 2020 along with the notification for the sake of candidates to prepare themselves for the Exam. Based on the Odisha SSC JE (Civil) Syllabus 2020 Aspirants can get an idea about the Exam and start preparation. No Contender can get qualified marks in the OSSC JE Civil Exam 2020 without having proper knowledge of Odisha Junior Engineer (Civil) Syllabus & Exam Pattern 2020. The syllabus is based on Diploma Civil Engineering. In OSSC the Junior Engineer Civil exam fully based on Civil Engineering. Hence, candidate must prepared the exam by referring the OSSC JE Civil Syllabus.
Applicants who have finished the application process, need not wait till the Junior Engineer Civil exam date announcement, they can begin their preparation as early as possible. While preparing, below mentioned the Odisha Junior Engineer Paper Pattern 2020 & Previous Year Question Papers are also helpful for you. Candidates can see the subject wise Syllabus for Junior Engineer Civil at the later sections of this page.
Odisha SSC JE Civil Selection Process –
OSSC Junior Engineer Recruitment Selection Procedure involves the following selection rounds. People need to pass through the following selection rounds to get selected for the Junior Engineer Jobs.
Main Written Examination
Career Evaluation
Certificate Evaluation
OSSC JE Exam Pattern 2020
Odisha JE Paper Pattern 2020 are included here. Candidates can know the negative marking scheme, type of questions, topics weightage details by seeing the question paper pattern. Individuals can have a look at the subject names, total questions, maximum marks & period at OSSC Junior Engineer Exam Pattern 2019.
The main written examination will have objective type questions. And the test to be conducted in OMR sheet/ CBRT.
There shall be a negative marking of 0.25 for each wrong answer.
No marks will be awarded or deducted for any question left unattempted.
The total marks allotted for the exam are 100.
The test duration is 1 hour, 30 minutes.
OSSC Junior Engineer Civil Exam Detailed Syllabus –
The question of this paper will be objective type from the Diploma courses to conducted on OMR sheets/ CBRT mode. The questions will be of objective type based on the 2nd and 3rd year of Diploma in Civil Engineering courses of sCTE & VT, Odisha. Total 100 questions for 100 marks & duration of paper is 90 minutes.
The gist of the syllabus of written examination is a described below. The syllabus is indicative and not exhaustive. The question will be asked form both the theory and application part on each of the topic.
(a) Hydraulics – Hydrosttics, Kinematics of fluid flow, pumps.
(b) Survey – Introduction to surveying, Linear measurements, chaining, chain surveying, angular measurement, chain and compass surveying, computation of area, plane table surveying, levelling, contouring, principles of theodolite surveying, theodolite traversing, tracheotomy, curves, setting out works, modern surveying method.
(c) Civil Engineering materials – Stone, Bricks, clay products and refractory materials, cement, sand, gravel, morrum and fly ash, mortar and concrete, timber, paint, varnish and distemper, iron and steel, bituminous materials, plastics, heat proofing and acoustic materials.
(d) Construction Technology – Introduction to construction technology, site investigation, foundations, walls, damp proofing, arches and lintels, doors and windows, floors, roofs, stairs, surface finishes, general idea of seismic planning and design of building, construction machineries.
(e) Structural Analysis – Trusses and frames, slope and deflection, fixed beam, continuous beam, slope deflection method, moment distribution method, three hinged arches.
(f) Transportation Engineering – Introduction to transportation engineering, road geometric, road materials, road pavements, hill roads, road drainage, road maintenance, construction equipment, traffic studies, landscaping and arboriculture, Introduction to railways transporting, permanent way, track materials, geometric for broad gauge, points and crossings, laying and maintenance of track, introduction to bridges, bridge site investigation, hydrology and planning bridge foundation, bridge substructure and approaches, permanent bridges, culvert and cause ways, introduction to docks and harbours, break waters, dock, introduction to airport engineering, components of an airport, tunnel engineering.
(g) Irrigation Engineering – Introduction to irrigation engineering, hydrology, water requirement of crops, flow irrigation, diversion head works, regulatory works, cross drainage works, dams, water logging and drainage, ground water hydrology.
(h) Estimating – Introduction to estimating, detailed estimate of building as per PWD specifications/ standards, analysis of rates, administrative setups of engineering organizations, detailed estimate of culverts and bridges, estimate of irrigation structures, detailed estimate of roads, PWD accounts works.
(i) Structural Design – Introduction to design and detailing, working stress method of design, limit state method (LSM) of design, limit state of collapse of singly reinforced members in bending, limit state of collapse in shear (Design of shear by LSM), bond anchorage, development lengths and slicing (LSM), beams (LSM) two way slabs (LSM), axially loaded short columns (LSM), ductile detailing or reinforced concrete structures subjected to seismic forces, Design of steel and timber structures (limit state), structural steel fasteners and connections, design of tension members, design of compression members, design of column bases and foundations, design of steel beams, design of timber structures, stair case (RCC-LSM), design of footings (RCC-LSM).
(j) Public Health Engineering – Introduction to water supply engineering, quantity of water, sources of water, conveyance of water, quality of water and treatment of water, distribution system, appurtenance in distribution system, water supply plumbing in building, introduction to sanitary engineering, quantity of sewage, sewerage system, sewer appurtenance, sewage characteristics, sewage disposal, sewage treatment, sanitary plumbing for building and rural water supply sanitation.
(k) Construction Management – Introduction to construction management, construction planning, materials management, site management, construction organization, labour management, equipment management, quality control, monitoring progress and safety management in construction works.
(l) Advanced Construction Technology – Concrete mixed design, handling and transporting of concrete, earthquake resistant construction, building services, construction and earth moving equipment.