HPCL Visakh Refinery Operation Technician Paper on Heat Transfer

If you are appearing Hindustan Petroleum Corporation Limited Visakh Refinery Operations Technician Recruitment exam 2020 and searching HPCL Operatoins Technician Previous Year Paper/ Model Paper/ Sample Paper then you are at right place. Here, we are publishing Heat Transfer question paper for your practice.

Fourier”s law applies to the heat transfer by
(a) Convection
(b) Radiation
(c) Conduction
(d) All of the above

Fouoling factor
(a) is a dimensionless quantity
(b) does not provide a safety factor for design
(c) accounts for additional resistance to heat flow
(d) None of these

Thermal conductivity of a conducting solid material depends upon its
(a) Temperature
(b) Porosity
(c) Both (a) and (b)
(d) Neither (a) nor (b)

Which area is used in case of heat flow by conduction through a cylinder ?
(a) Logarithmic mean area
(b) Geometric mean area
(c) Arithmetic mean area
(d) None of these

For large heat transfer area requirement, shell and tube heat exchanger is preferred, because it
(a) occupies smaller space
(b) is more economical
(c) is easy to operate and maintain
(d) all of the above

In forced convention the heat transfer depends on
(a) Re, Pr
(b) Re, Gr
(c) Only Gr
(d) Only Re

Which increase in temperature, the thermal conductivity of most liquids
(a) increases
(b) decreases
(c) Remains same
(d) First increases then become constant

In a liquid-liquid heat exchanger, for the same process temperatures, the ratio of LMTD in parallel flow to the LMTD in counter flow is always
(a) <1
(b) >1
(c) 1
(d) Infinity

When warm and cold liquids are mixed, the heat transfer is mainly by
(a) conduction
(b) convection
(c) radiation
(d) both (a) & (c)

At what value of Prandtl Number, the thermal and hyrodynamic boundary layers are identical?
(a) 0.5
(b) 1
(c) 1.5
(d) 80

Natural convection is characterized by
(a) Grashoff’s Number
(b) Peclet Number
(c) Reynold Number
(d) Prandtl Number

1-2 heat exchangers means
(a) one tube pass and two shell passes
(b) one shell pass and two tube passes
(c) one shell pass and one tube pass
(d) None of these

Double pipe heat exchangers are preferred when
(a) overall heat transfer coefficient is low
(b) liquid is more viscous in nature
(c) low heat transfer area is required
(d) liquid is corrosive

In shell and tube heat exchangers, if tube surface is rough, heat transfer coefficient
(a) increases
(b) decreases
(c) Remain same
(d) None of these

Temperature variation in plain wall is
(a) Logarithmic
(b) Linear
(c) Parabolic
(d) None of these


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *